Murata 2048lT/UT CNC punch pliers
CNC punch press pneumatic clamp is one of the important reasons that affect the accuracy of machining parts.
1: after long-term use of pneumatic clamp pliers body and the left and right arm, the clamp force around after yaw control within 0.05mm.
2: when the clamp force in the fore-and-aft direction after there is a big swing, at this time should be to reduce the gap by repair type T axis, the deflection should be controlled within 0.03-0.05mm.
The 3: CNC punch press pneumatic clamp with floating principle design, when the gap around the upper clamp body should be adjusted to, floating.
4: if the clamp plate is loose, it should be tightly fixed tooth plate connecting screws. If CNC punch press pneumatic clamp tooth tooth plate surface smooth, should replace the tooth plate.